remove whitespaces on end of lines
Signed-off-by: Jan-Tarek Butt <ta...@ring0.de>
---
scripts/combined-ext-image.sh | 4 ++--
scripts/flashing/flash.sh | 6 +++---
scripts/patch-kernel.sh | 20 ++++++++++----------
scripts/rstrip.sh | 2 +-
4 files changed, 16 insertions(+), 16 deletions(-)
diff --git a/scripts/combined-ext-image.sh b/scripts/combined-ext-image.sh
index e54ae3a..c01cf40 100755
--- a/scripts/combined-ext-image.sh
+++ b/scripts/combined-ext-image.sh
@@ -9,7 +9,7 @@
# Write image header followed by all specified files
# The header is padded to 64k, format is:
# CE magic word ("Combined Extended Image") (2 bytes)
-# <CE_VERSION> file format version field (2 bytes)
+# <CE_VERSION> file format version field (2 bytes)
# <TYPE> short description of the target device (32 bytes)
# <NUM FILES> number of files following the header (2 byte)
# <file1_name> name of the first file (32 bytes)
@@ -20,7 +20,7 @@
# <fileN_md5> md5 checksum of the Nth file (32 bytes)
## version history
-# * version 1: initial file format with num files / name / length / md5
checksum
+# * version 1: initial file format with num files / name / length / md5
checksum
ME="${0##*/}"
diff --git a/scripts/flashing/flash.sh b/scripts/flashing/flash.sh
index 7f2cdf5..8973aac 100755
--- a/scripts/flashing/flash.sh
+++ b/scripts/flashing/flash.sh
@@ -1,6 +1,6 @@
#!/bin/bash
#
-# tftp flash script for wireless routers
+# tftp flash script for wireless routers
#
# Copyright (C) 2004 by Oleg I. Vdovikin <o...@cs.msu.su>
# Copyright (C) 2005 by Waldemar Brodkorb <w...@openwrt.org>
@@ -24,10 +24,10 @@ if [ -z "$1" ] || [ ! -f "$1" ] || [ -z "$2" ]; then
echo Usage: "$0" firmware vendor
cat << EOF
IMPORTANT:
-Notes for Linksys / Asus WL500gx router:
+Notes for Linksys / Asus WL500gx router:
be sure you have set boot_wait to yes. Power on your router
after executing this script.
-
+
Notes for Asus WL500g router:
be sure POWER led is flashing (If this is not the case
poweroff the device, push the reset button & power on
diff --git a/scripts/patch-kernel.sh b/scripts/patch-kernel.sh
index f0f294e..4ca8783 100755
--- a/scripts/patch-kernel.sh
+++ b/scripts/patch-kernel.sh
@@ -18,25 +18,25 @@ if [ ! -d "${patchdir}" ] ; then
echo "Aborting. '${patchdir}' is not a directory."
exit 1
fi
-
-for i in ${patchdir}/${patchpattern} ; do
+
+for i in ${patchdir}/${patchpattern} ; do
case "$i" in
*.gz)
- type="gzip"; uncomp="gunzip -dc"; ;;
+ type="gzip"; uncomp="gunzip -dc"; ;;
*.bz)
- type="bzip"; uncomp="bunzip -dc"; ;;
+ type="bzip"; uncomp="bunzip -dc"; ;;
*.bz2)
- type="bzip2"; uncomp="bunzip2 -dc"; ;;
+ type="bzip2"; uncomp="bunzip2 -dc"; ;;
*.zip)
- type="zip"; uncomp="unzip -d"; ;;
+ type="zip"; uncomp="unzip -d"; ;;
*.Z)
- type="compress"; uncomp="uncompress -c"; ;;
+ type="compress"; uncomp="uncompress -c"; ;;
*)
- type="plaintext"; uncomp="cat"; ;;
+ type="plaintext"; uncomp="cat"; ;;
esac
- [ -d "${i}" ] && echo "Ignoring subdirectory ${i}" && continue
+ [ -d "${i}" ] && echo "Ignoring subdirectory ${i}" && continue
echo ""
- echo "Applying ${i} using ${type}: "
+ echo "Applying ${i} using ${type}: "
${uncomp} "${i}" | ${PATCH:-patch} -f -p1 -d "${targetdir}"
if [ $? != 0 ] ; then
echo "Patch failed! Please fix $i!"
diff --git a/scripts/rstrip.sh b/scripts/rstrip.sh
index 5c8a5aa..57c76c0 100755
--- a/scripts/rstrip.sh
+++ b/scripts/rstrip.sh
@@ -1,5 +1,5 @@
#!/usr/bin/env bash
-#
+#
# Copyright (C) 2006 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
--
2.10.0
_______________________________________________
Lede-dev mailing list
Lede-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/lede-dev
