Am 29.07.2016 um 19:52 schrieb Felix Fietkau: > On 2016-07-29 18:48, e9hack wrote: >> dhcp.dnsmasq is include via /etc/dnsmasq.conf. Configuration isn't simple. > Pushed two more fixes. Please test again.
Name resolution on br-lan works, but some entries in /var/etc/dnsmasq.conf are different: new: interface=br-lan interface=eth1.3 interface=br-guest1 interface=br-guest2 interface=br-tor except-interface= except-interface= except-interface= except-interface= except-interface=pppoe-wan except-interface= old from yesterday's build: interface=br-lan interface=eth1.3 interface=guest1 interface=guest2 interface=tor except-interface=tap0 except-interface=eth0 except-interface=eth1 except-interface=eth1.1 except-interface=eth0.7 except-interface=wan6 I'm not sure, if br-guest1 or guest1 is correct. The bridge interface br-guest1 contains a wifi network only, which is setup by 'option network guest1' wireless configuration. ifconfig shows br-guest1. The same is valid for br-guest2 an br-tor. br-guest1 and br-guest2 seems to work with both entries in dnsmasq.conf. Currently, I can't test br-tor, but tor does work. Regards, Hartmut _______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev
