> On 22-May-2016, at 3:22 PM, Dheeran Senthilvel <dheeranm...@gmail.com> wrote: > > >> On 22-May-2016, at 3:21 PM, Dheeran Senthilvel <dheeranm...@gmail.com> wrote: >> >> >>> On 22-May-2016, at 3:02 PM, Dheeran Senthilvel <dheeranm...@gmail.com> >>> wrote: >>> >>> >>>> On 21-May-2016, at 7:55 PM, Dheeran Senthilvel <dheeranm...@gmail.com> >>>> wrote: >>>> >>>> >>>>> On 21-May-2016, at 6:48 PM, Felix Fietkau <n...@nbd.name> wrote: >>>>> >>>>> On 2016-05-21 14:05, Dheeran Senthilvel wrote: >>>>>> Hi Guys, >>>>>> >>>>>> Nice work there getting everything to Linux 4.4.11. Tested the new >>>>>> build (r321 dated 20/05/2016) Everything is seems to work pretty >>>>>> decently, except that upon reboot (both manually or through command >>>>>> line) the device is struck. When serially accessed an error is seen >>>>> Please make a clean build from the latest version and reflash the image >>>>> from the boot loader. I just pushed some flash driver fixes... >>>>> >>>>> - Felix >>>> >>>> Thanks will try and will reply. >>>> >>> >>> Hi, >>> >>> Pretty quick work there, having merged the new mwlwifi driver. The >>> driver does improve performance - 374MBytes/s@2.4g and 1645MBytes/s@5g >>> using iperf for 30sec flooding. Also the long pings reported previously on >>> OEM and lede/openwrt seems to have been rectified on this new driver. >>> >>> Also the LEDs now work by default. Thanks again for that quick fix. >>> >>> But the NAND fix did not fix my problem of reboot/boot crashing. Same >>> error >>> >>> Regards >>> Dheeran >> >> Running r339 >> >> root@lede:/# uname -a >> >> Linux lede 4.4.11 #1 SMP Sat May 21 22:47:44 UTC 2016 armv7l GNU/Linux >> >> This is serial output after reboot command >> >> [ 1237.769778] br-lan: port 3(wlan0) entered disabled state >> [ 1237.775198] br-lan: port 2(wlan1) entered disabled state >> [ 1237.780566] br-lan: port 1(eth1) entered disabled state >> [ 1237.788228] device eth1 left promiscuous mode >> [ 1237.792676] br-lan: port 1(eth1) entered disabled state >> [ 1237.803425] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready >> [ 1237.810859] device wlan0 left promiscuous mode >> [ 1237.815361] br-lan: port 3(wlan0) entered disabled state >> [ 1237.820853] device wlan1 left promiscuous mode >> [ 1237.825347] br-lan: port 2(wlan1) entered disabled state >> [ 1239.000372] UBIFS (ubi1:0): un-mount UBI device 1 >> [ 1239.005105] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" stops >> crond[985]: USER root pid 2226 cmd /sbin/fan_ctrl.sh >> [ 1242.121994] reboot: Restarting system >> S-ENV offset == 0x240000 >> >> If you need anything else please mail me i will definitely try to my best to >> help to diagnose the problem. >> >> Regards >> Dheeran > > Haven’t setup a build system on my PC. Currently testing from the snapshot > from the repos >
root@lede:/# env SHLVL=3 HOME=/root mtdparts=armada-nand:2048K(uboot)ro,256K(u_env),256K(s_env),1m@9m(devinfo),40m@10m(kernel),34m@16m(rootfs),40m@50m(alt_kernel),34m@56m(alt_rootfs),80m@10m(ubifs ),-@90m(syscfg) PS1=\u@\h:\w\$ mangled_fs=jffs2 TERM=linux PATH=/usr/sbin:/usr/bin:/sbin:/bin PWD=/ _______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev
