> On 22-May-2016, at 3:21 PM, Dheeran Senthilvel <dheeranm...@gmail.com> wrote: > > >> On 22-May-2016, at 3:02 PM, Dheeran Senthilvel <dheeranm...@gmail.com> wrote: >> >> >>> On 21-May-2016, at 7:55 PM, Dheeran Senthilvel <dheeranm...@gmail.com> >>> wrote: >>> >>> >>>> On 21-May-2016, at 6:48 PM, Felix Fietkau <n...@nbd.name> wrote: >>>> >>>> On 2016-05-21 14:05, Dheeran Senthilvel wrote: >>>>> Hi Guys, >>>>> >>>>> Nice work there getting everything to Linux 4.4.11. Tested the new >>>>> build (r321 dated 20/05/2016) Everything is seems to work pretty >>>>> decently, except that upon reboot (both manually or through command >>>>> line) the device is struck. When serially accessed an error is seen >>>> Please make a clean build from the latest version and reflash the image >>>> from the boot loader. I just pushed some flash driver fixes... >>>> >>>> - Felix >>> >>> Thanks will try and will reply. >>> >> >> Hi, >> >> Pretty quick work there, having merged the new mwlwifi driver. The >> driver does improve performance - 374MBytes/s@2.4g and 1645MBytes/s@5g using >> iperf for 30sec flooding. Also the long pings reported previously on OEM and >> lede/openwrt seems to have been rectified on this new driver. >> >> Also the LEDs now work by default. Thanks again for that quick fix. >> >> But the NAND fix did not fix my problem of reboot/boot crashing. Same >> error >> >> Regards >> Dheeran > > Running r339 > > root@lede:/# uname -a > > Linux lede 4.4.11 #1 SMP Sat May 21 22:47:44 UTC 2016 armv7l GNU/Linux > > This is serial output after reboot command > > [ 1237.769778] br-lan: port 3(wlan0) entered disabled state > [ 1237.775198] br-lan: port 2(wlan1) entered disabled state > [ 1237.780566] br-lan: port 1(eth1) entered disabled state > [ 1237.788228] device eth1 left promiscuous mode > [ 1237.792676] br-lan: port 1(eth1) entered disabled state > [ 1237.803425] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready > [ 1237.810859] device wlan0 left promiscuous mode > [ 1237.815361] br-lan: port 3(wlan0) entered disabled state > [ 1237.820853] device wlan1 left promiscuous mode > [ 1237.825347] br-lan: port 2(wlan1) entered disabled state > [ 1239.000372] UBIFS (ubi1:0): un-mount UBI device 1 > [ 1239.005105] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" stops > crond[985]: USER root pid 2226 cmd /sbin/fan_ctrl.sh > [ 1242.121994] reboot: Restarting system > S-ENV offset == 0x240000 > > If you need anything else please mail me i will definitely try to my best to > help to diagnose the problem. > > Regards > Dheeran
Haven’t setup a build system on my PC. Currently testing from the snapshot from the repos _______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev
