At 10:25 AM 7/15/2007, Ross Lindahl wrote: >Gents >This is a first for me so please be patient with me. An existing tda200 >v3.2. and a new tda100 v3.2. They are aprox 12 to 15 hundred feet apart. >We are using a radio transmitter that supports T1 and Lan connections >from point to point. I have set up for each switch a tda 0920 sd mem >card along with tda 0490 ip gateway card for each switch. I want to use >the telco lines from the tda200 when ever I need to call out from the >tda 100. The extensions that already exist on the tda200 are 1xx through >4xx. I am pretty flexible with the extensions on the tda 100. I was >reading about how dialing could be set up so that each pbx has unique >extensions. Dialing from one switch to the other would require just the >3 or 4 digit extension number. The other method would be to dial the pbx >number followed by the extension number number. Dialing out on telco >facilities from the tda100 would be to first dial the switch number of >the tda200 followed by the tie line digit and finally 9 and area code >and number. I would like to set these two switches up the easiest way >possible for now just so they are connected together and they can call >each other and the tda100 can make calls out using the telco from the >tda200 switch. Any information would be helpful. >All I have is the kxtda0490 pprogramming guide.
Ooh, I remember this one. It was a class example. What did they teach you in class? Carl _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
