Pair 1 of the station cable is bad. a 7130 uses pair 1 for voice, pair 2 for data/power (apits) (7020 is apits to)
a 7433 only uses pair 2 voice/data/power (dpits) I bet an slt is noisy too. Don't overlook the station cord, wall to set. noise is wet cable or jack, did the jack get wet / turn green? -larry / dallas Rick McCoy wrote: >Here is an interesting problem. I have a KXTD1232-6 with 7 ext's. On >one ext that had a kxt7130 desk phone all of the 4 voice lines had a lot >of scratchy static, and in fact sometimes all 4 lines would go dead, >intercom and the phone itself were alive, at least the screen was on >with date/time. I took the phone from the jack it was plugged into and >tried it elsewhere and it worked fine. I also plugged the phone into a >patch panel for the ext's, that lead to all the ext's, and it would be >fine there. So you would think that the line from the patch panel to the >wall jack for that phone is bad. So I had it checked out, without any >real findings of problems. But if I bring another phone, a KXT7433 to >the same dead or scratchy ext it works fine, so much for a bad line? >Also the phone(KXT7130) that wasn't working will then work at another >ext just fine. So bad phone, I don't know. I also brought another ext >from home, a KXT7020 and tried it at the bad ext and it too either was >scratchy or dead, yet it worked fine elsewhere or directly at the patch >panel going to that ext. > >I'd love some ideas? > >Rick McCoy >Lopez Island Pharmacy > > > _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
