A quess, most pano's also have trunk groups. So 81 should select co1. 82 selects co 2, up to 88. Also there should be settings for "co outgoing" day and night that will allow you to set the port you are dialing out on to only select the co's that are "enabled" (when dialing 9). BTW- 81 thru 88 would replace the 9 on making an outgoing calls.
-larry / dallas douglas brander wrote: >I have a computer that still needs to dial out (to peanut gallery: it's a >computer to program subscriber's alarm panels). I wish to have it pick up >on co2. It's easy enough to have it dial a 9, but that just gets me to co1. >I tried to make co2 primary but no luck for some reason. I have enabled >parallel connect. I have noticed when a sys phone is plugged into a jack, >the analog phone on the same extension no longer needs to dial a 9. No sure >if that's relevant to this solution. Any ideas on how to get it to pick up >on co2 instead of co1 after the 9 is entered? > >Doug > > > > > >_________________________________________________________________ >KX-T Mailing list --- http://kxthelp.com/ >Subscription changes: http://kxthelp.com/mailman/listinfo/kxt > > > > > _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
