For the benefit of others who might encounter similar problems, the 2xx entry in the TVS 'extension numbering plan' table appears to have been cleared somehow (this did work at one time...). The only entry was 1xx, so any leading digit other than 1 was simply passed to the menu system. Restoring the 2xx entry cured the problem.
program -> system parameter setting -> others -> extension numbering plan Thanks to all who offered suggestions. -Mike ----- Original Message ----- From: <[EMAIL PROTECTED]> > Make sure you have a 2 as a leading digit for an extension in the TVS200 > setup. If leading digit is just a 1, then the system will not wait for additional digits. > Carmen > > > -----Original Message----- > From: [EMAIL PROTECTED] > > > We have an older KX-TD1232 and a TVS200. The TVS is programmed for a simple > custom service... a greeting and a couple menu options. > All has been working fine for years, but suddenly it will no longer wait for > additional digits if the first digit is a 2. I.e., I > can call in and dial extension 113 just fine, but if I try to dial 213, it > goes > immediately to the function assigned to 'press 2'. > > I tried lengthening the 'wait for second digit' time and now it waits longer > after a 1 but still doesn't wait at all after a 2. > > Any suggestions? > > Thanks, > > -Mike _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
