In the default mode, it has to be done from Ext 101. If you want another extension to have this capability, you need to change the time mode control under the COS for that extension.
You can also program a DSS button on the 7630 by pressing PROG, then the DSS button. Use the up/down jog dial until TIME SERVICE appears, then enter your parameters. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Michael Duffy Sent: Thursday, March 09, 2006 12:14 PM To: KXT Mailing list Subject: KX-T: KXTDA 100 & 30 Dear All I have installed both of these systems in the last few days and have come up with two problems First Problem: Setting up the Night Service as a flexible button. I am using the KXT 7630 telephone on extension 20 which is the operators ext. I cannot get the Time Service Mode Control flexible button to work correctly. From my understanding you can programme a flexible key for the Day/Night Service which be changed by pressing the flexible button. I am using the parameters 59 + 0/1/2/3/4 (+ # tennant No) not all at once...... What is the correct setup for setting up the day/night service. Second Problem: Call Forwarding to either intercom call or external call. When I set using the parameters in customizing your buttons or even on the PC it doesn't work is their anything I am missing. I am using the KXT 7630/33 telephones. Any help would be appreciated. Regards Michael _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
