You've encountered one of the best (worst?) examples of Panasonic stooooopidity.
A $5 CID box is better than a $5,0000 KX-TD system (KX-TA624 and 824 are much better). Unanswered calls are logged only at the lowest-numbered phone where the line is programmed to ring (usually 101). If you have a voice processor, it's likely that no calls will be logged at a phone. Answered calls can be manually loggged by pressing the LOG button on a phone during a call. The best way to log all calls is with a PC or printer connected to the serial port. Michael N. Marcus AbleComm, Inc. www.ablecomm.com etc. ----- Original Message ----- From: <[EMAIL PROTECTED]> To: <kxt@kxthelp.com> Sent: Sunday, August 28, 2005 4:35 AM Subject: KX-T: KXTD816 missed calls not showing >I have an interesting problem. I noticed that > only the phone on extension 101 shows missed calls. Other > phones are riniging (1:N) they just don't show any missed calls. > > Before all the phones were in one room, and DDI was installed, so when > called directly they of course showed the missed calls, but now I don't > know how to do this, as on this location I dont have DDI. > > The version of KXTD816 I have doesn't have phantom extension or is able to > ring a Group > (i made some groups and can't enter them as extension to ring in 1:N) > > Is there something else I can do to make all the phones which are > ringing show the missed calls? > > And I have another question, how to make the phones log picked up > calls too, is it possilbe? Any simple cell phone shows missed, called > and picked up calls, sure that this should also. > > > > _________________________________________________________________ > KX-T Mailing list --- http://kxthelp.com/ > Subscription changes: http://kxthelp.com/mailman/listinfo/kxt > _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
