I had trouble with the TA1232 software too, not the same thing though. When uploading data, it would drop the first digit of any flex co buttons, including things like VTR-. It also caused the Auto-Answer buttons to flash when they are on.
I sent my files to Panasonic for analysis but after six months, they said they had found the problem, but they never had a solution. They told me to try a new program from their website but it was the same program I had, and the problems still existed. The customer learned to deal with the blinking auto answer light. I really didn't feel like reprogramming the whole thing manually. I'm curious if anyone else had weird problems too. Charles ----- Original Message ----- From: "John Berry" <[EMAIL PROTECTED]> To: <kxt@kxthelp.com> Sent: Sunday, August 14, 2005 4:52 PM Subject: KX-T: The Trouble with KXTA1232 Software... >I had an issue the other day on a new install with a KXTA1232-2 and the >latest download of the Windows Programming Software from the b2b site. > > > I changed the extension numbers for all 8 extensions currently connected > (The cabling contractor must have punched down the wire BEFORE they > labeled > them), to the KXTA 1232-2. So in other words, JACK 01 is extension 112 and > JACK 12 is EXT101 and so on, times 8 Extensions. > > The client wanted immediate ringing on ext 101 & 102, and delayed ringing > on > 4 other extensions, and no ringing on two. I also like to program 6 > rings-delayed to the vmail ports for AA backup (Day Mode) in most small, > busy offices. > > Ok that's the setup, here is the weird issue I had today, when I connected > via the software, using interactive programming, I went to the EXTNS -> > DIL1:N - Line Assignments Tab, then made all my changes for delays in Day > and night, clicked apply then OK. > When I click on the same tab to verify the settings, the changes I made > were > not in the right extension-jack assignment. I have repeated this in > practically every combination and have back traced with no results and I > cannot figure out why these changes are not being saved to the right > Spaces > in the database table. > > Ok so I checked an 848, kxtd1232, and a new 824, and cannot get the same > results. Has anyone had issues with the KXTA1232 Software where it shifts > data during the upload? > > BTW: > Yes I did default the system before I started. > Yes I did restart the application and the PC. > YES I DID finally program it from the darn phone! > > -- Thank you, John Berry San Diego, CA > > > -- > This message has been scanned for viruses and > dangerous content by MailScanner, and is > believed to be clean. > MailScanner thanks transtec Computers for their support. > > > _________________________________________________________________ > KX-T Mailing list --- http://kxthelp.com/ > Subscription changes: http://kxthelp.com/mailman/listinfo/kxt > > _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
