At 12:05 PM 7/1/2003 -0700, Edward Chu wrote: >Hello, > >Hope someone out there can help me. > >The 816 and the 100 have been running fine for a couple of months. Just now needing the extra extenstions on the 170. Hooked up the 170 to the 816 on the lower expansion port. Plugged in a 25-pin Male to Male Amphenol cable to the 170, running into a "used" 66 block with amphenol connection on the side. The 66 has only 3 colums of pins, the 3rd being wired from the back to the amphenol. The fourth is empty. > >Running 4 wires (B/W, B, O/W, O) to the first set of pins from the top on column 3, I tried crimping on a modular plug onto the 4 wires, and plugging it into a working T series phone. No display on the phone's panel, no dial tone. Phone works when plugged into any of the 816 exts. > >When I UNPLUG the cable from the bottom of the phone (off of the 66), I hear that "dissipating power" kind of sound from the phone. The same kind as when you unplug a phone from the 816. > >So, where does my problem lie? Is there anything that needs to be set on the 816 to enable the 170? "Expansion Card" feature is set to "Master:E1;C1." Tried multiple phones. Checked continuity of Female Amphenol pins 1, 26, 2, 25 with row 1 thru 4 on the block. Is there a "special" place the extensions begin on the block? Tried starting from 50 up also.
How did you wire the jack? Oh, crimp? Try a jack and post your question again. >Second question: How can I transfer active calls directly to a voicemail box? I can transfer to voicemail, or to another ext, but can't transfer direct to voicemail. Does this have something to do with VM and AA settings? I believe out TVS100 is setup as AA. Plus, our 816 has an old ROM version according to Panasonic. The first release is what I was told. VTR is a probable feature of -3 or greater, but you can test it. From a PT, assign a LED button as VTR. Dial program 99 button 8 165 or whatever your VM port is. Test it by pressing the button and dialing the 3 digit extension number of the station you are transferring the call to. It will either work or it's time for an upgrade. Carl Navarro _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
