Does this mean that you're confirming that the TVS75 should support APT? I just want to make sure before resetting the 624. (You're right that it won't take TOO long to reprogram, but it'll take long enough that I don't want to do it unless there's a reasonable likelihood of success.)
-- Mark ----- Original Message ----- From: "From Select Telecom" <[EMAIL PROTECTED]> To: "Mark Pauker" <[EMAIL PROTECTED]>; "Charles P." <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Wednesday, February 26, 2003 4:21 AM Subject: KX-T: Re: Re: Help With KX-TA624 and TVS75 > I would perform an initialization on the KXTA624 > and reprogram the switch from scratch ......shouldn't take you that long > and just use program 130 or 131 to integrate the 2 > > Select Telecom Systems, Inc. > [EMAIL PROTECTED] > 305-235-3603 Voice > Harry Solorzano > www.select-telecom.com > > ----- Original Message ----- > From: "Mark Pauker" <[EMAIL PROTECTED]> > To: "Charles P." <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> > Sent: Wednesday, February 26, 2003 9:33 AM > Subject: KX-T: Re: Help With KX-TA624 and TVS75 > > > > > Yes, the fancy features of recording and live call screening and VTR > > button > > > require the "apits" integration (analog proprietary integration). > > > I hope the TVS75 should be able to do it, you need to try to set up the > > > ports in prog 130, then see if you get the integration to work - I think > > the > > > quick set-up in the vm would be the easiest way to check (the vm power > > light > > > goes steady once it makes the connection). The vm will say something > like > > > "apits connected" on the computer screen. > > > > I went to system programs 102 & 103 and disabled VM integration. I then > > used 131 to set up APT VM ports (on 15 and 16) and reset the TVS75. The > > TVS75 appears to connect to the system (the light stops blinking and it > says > > that it's online), but I get a busy signal when I attempt to dial into the > > VM port. > > > > Curiously, the busy signal occurs regardless of whether or not the TVS75 > is > > plugged into the ports. This suggests that either the TVS75 doesn't > support > > APT, or that I'm doing something wrong. Any idea which it could be? > > > > > If not, you may be stuck with analog integration. (You might try > looking > > > for a used KXTD816... you can use the same phones) > > > > I could also look into trading the TVS75 for a TVS50 (if the problem is > that > > the 75 doesn't support APT). My understanding is that the 75 is better > than > > the 50 (and that it's worth more) when used in conjunction with a digital > > system. > > > > But I think I'm getting ahead of myself here. The first question is > whether > > the 75 can support APT. The current software version is VB2270 (2.70), > and > > the ROM version is V011D (1.03). Does anyone know if I can set this up > > using APT? > > > > Thanks, > > Mark > > > > > > _________________________________________________________________ > > KX-T Mailing list --- http://kxthelp.com/ > > Subscription changes: http://kxthelp.com/mailman/listinfo/kxt > > > > _________________________________________________________________ > KX-T Mailing list --- http://kxthelp.com/ > Subscription changes: http://kxthelp.com/mailman/listinfo/kxt _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
