I would perform an initialization on the KXTA624 and reprogram the switch from scratch ......shouldn't take you that long and just use program 130 or 131 to integrate the 2
Select Telecom Systems, Inc. [EMAIL PROTECTED] 305-235-3603 Voice Harry Solorzano www.select-telecom.com ----- Original Message ----- From: "Mark Pauker" <[EMAIL PROTECTED]> To: "Charles P." <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Wednesday, February 26, 2003 9:33 AM Subject: KX-T: Re: Help With KX-TA624 and TVS75 > > Yes, the fancy features of recording and live call screening and VTR > button > > require the "apits" integration (analog proprietary integration). > > I hope the TVS75 should be able to do it, you need to try to set up the > > ports in prog 130, then see if you get the integration to work - I think > the > > quick set-up in the vm would be the easiest way to check (the vm power > light > > goes steady once it makes the connection). The vm will say something like > > "apits connected" on the computer screen. > > I went to system programs 102 & 103 and disabled VM integration. I then > used 131 to set up APT VM ports (on 15 and 16) and reset the TVS75. The > TVS75 appears to connect to the system (the light stops blinking and it says > that it's online), but I get a busy signal when I attempt to dial into the > VM port. > > Curiously, the busy signal occurs regardless of whether or not the TVS75 is > plugged into the ports. This suggests that either the TVS75 doesn't support > APT, or that I'm doing something wrong. Any idea which it could be? > > > If not, you may be stuck with analog integration. (You might try looking > > for a used KXTD816... you can use the same phones) > > I could also look into trading the TVS75 for a TVS50 (if the problem is that > the 75 doesn't support APT). My understanding is that the 75 is better than > the 50 (and that it's worth more) when used in conjunction with a digital > system. > > But I think I'm getting ahead of myself here. The first question is whether > the 75 can support APT. The current software version is VB2270 (2.70), and > the ROM version is V011D (1.03). Does anyone know if I can set this up > using APT? > > Thanks, > Mark > > > _________________________________________________________________ > KX-T Mailing list --- http://kxthelp.com/ > Subscription changes: http://kxthelp.com/mailman/listinfo/kxt _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
