Hello All, I have about two dozen series 7000 Hybrid phones (7020, 7030, 7130) that seem to have the same problem. They have gone dead.
When I connect them up to a PLC port (on a KX-T300), they are all totally dead. No lights, no display, nothing, just like it was never plugged in. However, when I connect up to a HLC port, I get a dial tone in the handset and can use the keypad to dial numbers. But there is no display, no lights, no ringer. It just acts like a single line phone (I assume this might be a power failure feature on these phones...). Has anyone out there worked much with these phones to know what causes them to fail? I have the service manuals for them, and every chip on the board seems to be getting power. My guess is the CPU chip on the phones has bit the dust, but I can't say for sure. Can anyone give me some insight? Thanks Tim ________________________________________________________________ GET INTERNET ACCESS FROM JUNO! Juno offers FREE or PREMIUM Internet access for less! Join Juno today! For your FREE software, visit: http://dl.www.juno.com/get/web/. _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
