Hello I have a Dash 4 system with a Esna Technologies Unified Messaging platform that works perfect. I work on that field since 1997. Most of the problems with the NT based platforms and Panasonic appears from flash timer and DTMF input time. The NT system can be developed over Dialogic or brooktrout (or lucent) boards. Both manufacturers provides a software to analize Panasonic (or any pbx) signaling. Data generated on the software must match panasonic programming. To integrate to the VM system,, the hunt group can be Automated attendant or voice mail it depends on the signaling your NT voice mail systems requires. Most of the time AA is better. The problem you describe is clearly signaling, so check the VM has the right parameters to work with the panasonic. I hope it clarifies something Jorge -----Mensaje original----- De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Enviado el: martes, 30 de julio de 2002 11:14 Para: Panasonic tech help Asunto: KX-T: TVS TO PC Based Voice Mail Okay ladies and Gentlemen, here's a good one. I recently deinstalled an 8 port TVS200. The customer had opted for a Windows NT based mail using inband signaling. This is a unified messaging platform. I removed all the program codes related to DPITS integration. But now the system is acting funny. The voice mail hunt group I set up, doesn't seem to hunt or to send out digits for messaging waiting, or any type of inband signaling etc. etc. I reset the system, but it seems to have the same problems....Any ideas? PS Does any one know if Panasonic is coming out with a unified messaging product Bill _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
