I had the same problem after removing a port of voicemail to install a more needed extension. I had to default the system and then uploaded the saved programming back into the pbx. Everything was fine after that. The switch just would not forget it was a voicemail port regardless of the programming.
Randy ----- Original Message ----- From: "David Jeter" <[EMAIL PROTECTED]> To: "Panasonic KXT list" <[EMAIL PROTECTED]> Sent: Wednesday, June 12, 2002 2:38 PM Subject: KX-T: KX-TD816 PORT #7 DEAD...CHECKED #117...STILL DEAD > I posted the 1st installment of this problem a few days ago. I though we had > port #7 assigned as VM port, along with #8. Today I verified that #8 was the > only one showing, from the displayphone(not jsut from programmator). This > verification was made after a powerdown of a minute or so. I am testing by > plugging a system phone directly into port #7 of the KSU, just to make sure. > I get power to the phone, which results in digit tones, and beeps for a few > of the function buttons, but no active COs and no system tome when off-hook > to intercom. IT is not assigned as a cordless or DSS. Any ideas? If it's > just dead, and since I'm not certified, what's next? Does my client have to > be w/o a KSU while this one is sent in, or are there modular replacement > parts that can be ordered and swapped? Thanks for any help you may be able > to lend. > > David Jeter > Vice President > Total Home Entertainment > 3501 I-35E > Waxahachie, TX 75165 > (972)938-1615 office > (214)893-3471 cell > (972)935-0539 fax > > > > > _________________________________________________________________ > KX-T Mailing list --- http://kxthelp.com/ > Subscription changes: http://kxthelp.com/mailman/listinfo/kxt > _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
