On Wed, 12 Jun 2002 08:53:06 -0400, you wrote (with possible editing): >System is a KXTD-1232 -4 with VPS50. > >I programmed a phantom extension in the 1232, then in the VPS 50, I >programmed an extension group to use the phantom extension. There are >maybe 6 extensions in the group. The group works fine, but if I >assign a CO button on a 7436 to be a MWL for the phantom, it does not >light. Other MWL's work fine. > >Any ideas? > >Thanks, > >Larry
Finally, I get to contribute something! I figured it out. The 1232 lights up a CO button programmed as a MWL for another extension based on the MWL of that extension; it apparently has nothing to do with the VPS 50. To have a CO button programmed as a MWL for a phantom extension which has been assigned to an extension group in the VPS, simply pick an extension in that group, not the phantom. For example, assume you create a phantom extension 295 in the 1232, and you assign that extension to an extension group in the VPS50 consisting of extensions 113, 115, 118, 125. You then create a custom service which sends the caller to voice mail for extension 295. When the caller leaves a message, the MWL's on 113, 115, 118, and 125 all light up. If you want to program a CO key on, say extension 101 to light up as well, you program it to be a MWL on extension 113, NOT 295. Larry -- [EMAIL PROTECTED] _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
