On 10/19/2021 10:19 AM, David Maultsby wrote:
Wrap a 3 ¼ inch wide strip of aluminum entirely around the wing from the
trailing edge around the leading edge and back to the trailing edge. Then you
will have to decide how to fasten the two ends together. I have seen a sort of
aluminum box pop riveted to one end with sheet metal screws holding the two
ends together.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
As the aileron butts up to the wing center section, my aluminum strip
does not meet up at the trail edge. The strip on the top has two small
screws to the spar cap on the top and the same on the bottom with two
small screws on the top in to the fiberglass wing at half chord. One
could supplement the screws with very thin sticky tape if desired. Mine
uses screws only and have held for nearly 800 hours now.
Larry Flesner
________________________________
-Please see LIST RULES and KRnet info at http://www.krnet.org/info.html
-Change list delivery options at
https://list.krnet.org/list/krnet.list.krnet.org/ Affinity List Info Board
-Search recent KRnet Archives at
https://list.krnet.org/empathy/list/krnet.list.krnet.org/
-Search John Bouyea's decades of archive at
https://www.mail-archive.com/krnet@list.krnet.org/
