These messages made me realize I didn't remember the dimensions of N133RM so I just put a tape measure on it for comparisons. Not sure what numbers Larry come up with but here are Roy's; 66" Center stub wing total width 86" Outer wing panels 34 1/2" each horz. stab width 40" vert. stab height John Bouyea N133RM KR-2S - imported, fixed & flying www.bouyea.net/cur_proj/N133RM OR81/ Hillsboro, OR
-----Original Message----- Subject: KR>Re: KR2S tail dimensions. I just rechecked my plans, I put handwritten notes for the KR2S changes directly on the KR2 manual pages when I built it. The horizontal stab and elevator width's are the same as the KR2, but there is an addition in length on both the stabilizer and elevator dimensions. So yes, there is an increase is area for these surfaces. The vertical stabilizer and rudder are both taller and has more length as well. From: Flesner <fles...@frontier.com> For some reason I always believed that the plans for the 2S increased the width of the horizontal stabilizer. At the Gathering I acquired a tape measure and checked. All the 2S KR's that had not been modified had the same width horizontal as mine with the standard KR2 width. I have no idea where that misconception came from. ________________________________ -Please see LIST RULES and KRnet info at http://www.krnet.org/info.html -Change list delivery options at https://list.krnet.org/list/krnet.list.krnet.org/ Affinity List Info Board -Search recent KRnet Archives at https://list.krnet.org/empathy/list/krnet.list.krnet.org/ -Search John Bouyea's decades of archive at https://www.mail-archive.com/krnet@list.krnet.org/
