On 7/23/2021 11:29 AM, Jim Litchfield wrote:
Well I have received my seatbelts and now I am again scratching my head
trying to get started on installing them.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
This photo does not show them installed on the front side of the rear
spar but is a good photo of their design. They are each bolted to the
rear spar with two 3/16" bolts, one through the center of each rear spar
cap. The "flat side" (90 degree angle) is mounted on the floor side.
(gusset pointing toward the floor) (material is 1/8" 4130 as I recall) I
extended the attach point of the belt forward of the spar for , what I
considered, better placement of the belt across my lap. My logic was a
close to rear spar belt attach held you from forward movement but less
from vertical movement. I tried to split the difference.
https://myplace.frontier.com/~flesner/fittings.jpg
As always, YRMV..............
Larry flesner
________________________________
-Please see LIST RULES and KRnet info at http://www.krnet.org/info.html
-Change list delivery options at
https://list.krnet.org/list/krnet.list.krnet.org/ Affinity List Info Board
-Search recent KRnet Archives at
https://list.krnet.org/empathy/list/krnet.list.krnet.org/
-Search John Bouyea's decades of archive at
https://www.mail-archive.com/krnet@list.krnet.org/
