Larry, thanks I've already made a pretty good taper jig and tried it out on
the elevator and rudder spars and it worked perfectly.Sent from my
U.S.Cellular© Smartphone
-------- Original message --------From: Flesner via KRnet
<krnet@list.krnet.org> Date: 3/4/21 08:12 (GMT-05:00) To:
krnet@list.krnet.org Cc: Flesner <fles...@frontier.com> Subject: Re: KR> Spar
Laminations On 3/4/2021 4:56 AM, costewart23 via KRnet wroteRun the piece
through the saw using the edge of the 1"x4" as a guide. A completed spar might
be easier to handle in the saw. It would just take a larger piece of wood for
the jig.Larry Flesner_______________________________________________Search the
KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/.Please see
LIST RULES and KRnet info at http://www.krnet.org/info.html.see
http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change
options.To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org
_______________________________________________
Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/.
Please see LIST RULES and KRnet info at http://www.krnet.org/info.html.
see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change
options.
To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org
