I read Jeff's pre-buy post that Mark L referenced, and found this: *"He [seller] explained that the Diehl wing skins require the rear spar to be swept slightly more forward than the stock wings. This won't allow you to use the rear spar attach fittings from RR and that I would need to fabricate a new set of rear spar attach fittings."*
My project is a well-done (30+ years ago!) KR1 boat stage, and I purchased an old unused set of Diehl skins. It's a good start. But before this goes by, what might I have to change regarding rear spars to use the Diehl skins with this boat state project? (I will file the replies with my hundreds of other helpful saves from this list) 😀 thanks > Anthony, see http://www.krnet.org/kronline/sept1996/ (about two thirds > of the way down) where Jeff Scott wrote about this _______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org
