I have used 2024t3 alluminium 1.6 thickness. I made two stifners in the middle and two small tubes to the next wooden member to support the pannel. Works great. To cut the holes I did everyting with a taperrouter. You need to practice a bit but if you now the trick you are free to cut everything on the line you drawed on your alluminium. See link below. https://www.google.nl/search?q=taperrouter&client=safari&hl=nl-nl&prmd=mivn&source=lnms&tbm=isch&sa=X&ved=2ahUKEwiU_MKg14_qAhUIDOwKHdEUD6gQ_AUoAnoECAoQAg&biw=1024&bih=649#imgrc=-O73DqP81Bt5BM
Stef > Op 20 juni 2020 om 3:15 schreef Flesner via KRnet <krnet@list.krnet.org>: > > > Airplane parts are where you find them. I guess I ought to take > photos of all that to document it. > > Larry Flesner > > +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > > I forgot to mention the nylon blocks for gull wing door hold down blocks > came for a nylon cutting board from the Dollar General store. > > Larry Flesner > > > _______________________________________________ > Search the KRnet Archives at > https://www.mail-archive.com/krnet@list.krnet.org/. > Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options. > To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org Steph and his dad are building the KR-2S see [http://www.masttotaalconcept.nl/kr2](http://www.masttotaalconcept.nl/kr2) _______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org
