John, I used the fibrefrax and stainless foil (.002")to create heat shields on the cowling. You can get the foil in 12" or 24" wide rolls. I sealed the perimeter with red rtv. So far so good.
Roger Baalman OK > On July 24, 2018 at 12:34 AM John Bouyea via KRnet <krnet@list.krnet.org> > wrote: > > > I have some exhaust parts a little too close to the cowl. All I can think up > with is Fibrefrax but it absorbs moisture if not covered with something. > > Any recommendations on heat shielding the area? > > John Bouyea > N5391M/ KR2 > OR81/ Hillsboro, OR > 2015 KR@MMV Gathering CoHost > > > > _______________________________________________ > Search the KRnet Archives at > https://www.mail-archive.com/krnet@list.krnet.org/. > Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options. > To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org _______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org
