Stef, You will want to use as little glue as possible, preferably around the edges. All you want is to hold the fiberfrax in place, not saturate its fibers more than you need to. With this in mind, I would put the glue on only one side, probably best to glue the wood if you can. iMs, Zip -----Original Message----- From: "Stef den Boer via KRnet" <krnet@list.krnet.org> Sent: Monday, June 18, 2018 10:18pm To: "krnet" <krnet@list.krnet.org> Cc: "Stef den Boer" <stefk...@ziggo.nl> Subject: KR> Gleuing fibre frax
Hi all, Almost finished the steelen fire wall and ready to install it with the fibre frax. I want to gleu the fibrefrax with red RTV 106, do I need to gleu the fibre frax to the firewall only at the wooden side, or to the woodenside and also to the steel side....or only to the steel side. How did you do it? Thanks Stef Steph and his dad are building the KR-2S see http://www.masttotaalconcept.nl/kr2 http://www.masttotaalconcept.nl/kr2 _______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org _______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org
