Also, interestingly the instructions mention this is rated for 3G. Mark Jones Oldsmar, Fl www.flykr2s.com [email protected]
Sent from my iPhone 7 > On Jun 12, 2018, at 8:50 PM, mark jones via KRnet <[email protected]> > wrote: > > The manual I have has no date on it but the gear kit it came with was bought > mid 90’s. It states “for tail dragged mount leg on front of spar angled > forward and for tri-gear mount leg on rear of spar angled rearward”. The > drawing Larry made is representative of the one in the manual. Now here is > the kicker. The gear legs that actually came with that manual are angled on > both leading edge and trailing edge. One side of the leg is angled more than > the other and that edge goes against the mount. This will yield a distance of > axle centerline from spar of approximately ten inches from the face of the > spar for both options. > > Mark Jones > Oldsmar, Fl > www.flykr2s.com > [email protected] > > Sent from my iPhone 7 > _______________________________________________ > Search the KRnet Archives at > https://www.mail-archive.com/[email protected]/. > Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options. > To UNsubscribe from KRnet, send a message to [email protected] _______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/[email protected]/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to [email protected]
