I can tell you my gear was 8‘6“ from center to center of the wheel I’m not sure how far that put the brackets from the fuselage but I was thinking it’s right around 18 inches
Sent from my iPhone > On May 29, 2018, at 1:46 PM, Chris Gardiner via KRnet <krnet@list.krnet.org> > wrote: > > Bob, > The Diehl plans say to place them as close to the fuselage as possible. > Use the appropriate AN bolts and lock nuts to mount to the spar. > Regards > Chris Gardiner > > Sent from my iPad > >> On May 28, 2018, at 9:27 PM, Robert Russell via KRnet <krnet@list.krnet.org> >> wrote: >> >> I am changing the gear on GSJS to fixed and I have my castings to fasten to >> the spar. I am just not sure of the proper placement and the archives appear >> to be having a problem. Can someone tell me how far inboard from the stub >> wing tip they should be? >> >> Thanks >> Bob >> _______________________________________________ >> Search the KRnet Archives at >> https://www.mail-archive.com/krnet@list.krnet.org/. >> Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. >> see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change >> options. >> To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org > > > _______________________________________________ > Search the KRnet Archives at > https://www.mail-archive.com/krnet@list.krnet.org/. > Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options. > To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org _______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org
