As a reminder. Dynon is one of the sponsor's for the Gathering. They are providing two $150 gift certificates that will be drawn for.
Paul ViskBelleville Il.618-406-4705 -------- Original message --------From: Rob Schmitt via KRnet <krnet@list.krnet.org> Date: 5/25/18 11:02 AM (GMT-06:00) To: KRnet <krnet@list.krnet.org> Cc: Rob Schmitt <robert7...@aol.com> Subject: Re: KR> Vacuum source in the Revmaster engine Luis, I am flying the Revmaster, but I do not use a vacuum drive instrument. I do have a Dynon D6. A good solution for sure. Like John mentioned, check for room before you install, mine is tight but worked out. Thanks, Rob Schmitt KR2S N1852Z > On May 25, 2018, at 2:56 PM, John Bouyea via KRnet <krnet@list.krnet.org> > wrote: > > Hi Luis. > I wanted more than needle, ball and airspeed too. I went with a Dynon D6 in > N5391M. For me, it was easier and less expensive than a vacuum source. > One thing to be aware of is the required depth of that device. Be sure you > have enough room forward of your panel to mount it. > Other instruments are available with less depth requirement and provide the > gyro functions. The Dynon offers AOA capability in the same device and that > is something I wanted. > Check EBay as I found both of mine there at very substantial discounts. If > required, you can do the software updates easily. > Good luck! > > John Bouyea > N5391M/ KR2 > OR81/ Hillsboro, OR > 2015 KR@MMV Gathering CoHost > > -----Original Message----- > Subject: KR> Vacuum source in the Revmaster engine > > Those that are flying the Revmaster engine in the KR... what vacuum source > are you using? In the absence of a doable solution I am thinking of a low > cost EFIS like the Dynon or something similar. Decision time on > instrumentation... > Luis R Claudio, KR2S Dallas, Texas > _______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org
