Sid is there anyway you could post s photo of your slider for the elevator cables? I'm going to do a similar conversion. Thanks Fuzzy Dave!
On Thu, May 17, 2018, 8:32 PM Sid Wood via KRnet <krnet@list.krnet.org> wrote: > After months of trials and try again, finally got the seat and elevator > control linkage to agree. I made a slider to go under the seat and all > moving parts are smooth operation without any interference. The fit check > with seat belts fastened, cushions in place, headset on, and canopy locked, > has 2.5 inches headroom to the Plexiglas. Sight picture over the cowl > remains the same as with the two-seat configuration. > Selfie fit check. Note the left elbow room. > https://s3.amazonaws.com/expercraft/sidwood/876598135afe164aa29ed.jpg > > Sure want to see MVN in that sight picture instead of a hangar door. > https://s3.amazonaws.com/expercraft/sidwood/16920033865afe192e95dbb.jpg > > Sid Wood > Tri-gear KR-2 N6242 > California, MD, USA > > > > _______________________________________________ > Search the KRnet Archives at > https://www.mail-archive.com/krnet@list.krnet.org/. > Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options. > To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org > _______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org
