Luis Claudio;
I purchased the same heads for my 2080 cc engine. I believe that I have the
D2000 mag that I intend to install. I called Joe H. at Revmaster and he
indicated that he could convert the leads to automotive ends. I have to mail
the magneto cap to him.
I do not know which adapters you are referring to (Great Plains?) but if you go
that route you may have difficult with the secondary plug on the bottom side of
the head as the space there is very limited. In my last set up I had to
shorten the spark plug boots by taking an exacto knife to the rubber boots an
shortening them by 1/2 inch.
Marc BacaChino, CA
On Thursday, February 1, 2018, 4:39:15 PM PST, Luis Claudio via KRnet
<krnet@list.krnet.org> wrote:
I bought the new heads for my Revmaster 2100D engine with the automotive
plugs. My engine has the D3000 mags and I need to convert it to auto plug
wires. I have searched through the archives and have seen some recommendations
about the GP shielded spark plug adaptors. Is this the best way to go or does
anyone else have a different route?
Thanks
Luis R Claudio, Dallas, Texas
_______________________________________________
Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/.
Please see LIST RULES and KRnet info at http://www.krnet.org/info.html.
see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change
options.
To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org
_______________________________________________
Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/.
Please see LIST RULES and KRnet info at http://www.krnet.org/info.html.
see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change
options.
To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org
