This control rod reversal bell crank is an adaption of the aileron bell
crank called out in the KR-2 construction manual. This has been in N6242
for at least 10 years.
https://s3.amazonaws.com/expercraft/sidwood/18464794504710108747c58.jpg
Sid Wood
Tri-gear KR-2 N6242
Mechanicsville, MD, USA
----------------------------------------------------------
Larry
Very neat and quite ingenious? that idea is a keeper with your permission?
jw
On May 14, 2017, at 20:48, Larry Flesner via KRnet <krnet@list.krnet.org>
wrote:
Oscar,
Here are some close ups of my throttle cable reversing assembly. The two
arms are held stationary to each other by the pivot and one additional
bolt. The arms are spaced with washers but a light aluminum tube would be
lighter. That, and aluminum bolts, narrower arms, would all save weight.
If installing on Mark's KR I could probably cut the weight by 30%.
https://www.dropbox.com/s/7r3ikcztnpzoxas/IMG_9051.JPG?dl=0
https://www.dropbox.com/s/5hgr2pxo707ot5m/IMG_9052.JPG?dl=0
------------------------------
_______________________________________________
Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/.
Please see LIST RULES and KRnet info at http://www.krnet.org/info.html.
see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change
options.
To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org
