Chris Gardner I have a similar pump and have not used it as yet…. had intended to do testing with T-88 until i can produce the proper mixture… I use 50-50 by measure not weight… would like your thoughts on my approach.. tnx… jw
> On May 14, 2017, at 20:40, Chris Gardiner via KRnet <krnet@list.krnet.org> > wrote: > > Bob, > The West System pumps are great for dispensing the resin and hardener but you > should mix the batches using an accurate weigh scale to get the ratio correct. > Air bubbles in the pumps can sometimes bias the mix ratio unless you check > every batch. > Chris Gardiner > > Sent from my iPad > >> On May 12, 2017, at 3:11 PM, Robert Russell via KRnet <krnet@list.krnet.org> >> wrote: >> >> I picked up my West System pumps and some epoxy today. >> I will try some gluing some small pieces to get the feeling and a bit of >> experience with it before moving on to anything really critical. Have never >> really worked with it before. _______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org
