Bob,
The AS Economy tool is what I used when building my KR. It works fine. The inspector did want to see a sample (off the airplane) I had put together to verify they were done correctly. So you might want to make a couple samples 1st to practice, then save them in case it comes up later. I think I've used the samples a few times for hanging heavy objects in the garage. Rob Schmitt N1852Z www.robert7721.com -----Original Message----- From: Robert Russell via KRnet <krnet@list.krnet.org> To: KRnet <krnet@list.krnet.org> Cc: piney <pi...@mymts.net> Sent: Tue, May 2, 2017 7:09 am Subject: KR> swaging tool I should have done my test before posting the previous email about the Princess Auto tool. The jaws only allow for two crimps as they are too wide for three on a sleeve and don't seem as tight as they should be. I will order the "economy swaging tool" from AS because that should work. better. Every day is a learning experience for me. Bob R _______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org _______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org
