Pat: > > What are you building?Have been building a stretched and widened KR-2S. > Started work Feb 2006. Fuselage, turtledeck, forward deck, canopy, tail > (elevator and rudder) are complete except for finish and paint . It's up on > the gear with wheels and brakes complete. Engine is a 2700 Corvair with a Roy > bearing. It's done and test run. > > What did you accomplish with it during 2012?Not as much as I hoped. Fit and > set canopy and locking system. Wired the panel, have most done (comm radio, > breakers, fuel ratio, elevator trim, etc) except for a Dynon DEK-180 or > SkyView and an iFLY 720. Installed fwd deck. > > What do you hope to accomplish with it during 2013?Complete wheel pants (fit > them to the gear), fabricate the engine cowling, purchase the prop (probably > a Sensnich 54 x 54). Start assembly of outboard wings. Spars are complete and > I have a complete set of Diehl RAF-48 inboard and outboard skins that I will > be using. Will fabricate aluminum fuel tanks for the outboard wings. Pete > Klapp, building KR-2S N729PK,Canton, Ohio
> _________________________________________________________ > search the CorvAircraft archives at > http://tugantek.com/archmailv2-cvr/search. > To UNsubscribe from CorvAircraft, send a message to > corvaircraft-le...@mylist.net > Other CorvAircraft list info is at > http://www.krnet.org/corvaircraft_inst.html > > > > _________________________________________________________ > search the CorvAircraft archives at http://tugantek.com/archmailv2-cvr/search. > To UNsubscribe from CorvAircraft, send a message to > corvaircraft-le...@mylist.net > Other CorvAircraft list info is at http://www.krnet.org/corvaircraft_inst.html
