Hi Dean, I'll add that the quantity of hinges as designed are fine, However I am using Bronze bushings in the aluminum hinges to prevent wear. I have heard stories of sloppy controls due to the bolt hinge holes being worn and elongated. I used bronze bushings from the hardware store, some are staright( the inner hinge member), and I used some flanged(outer -overlapped-hinge member . The bolts keep the bushings captive. I'll try to post pics soon. Hope this helps, Jim
________________________________ From: Dean Choitz <dscho...@yahoo.com> To: kr...@mylist.net Cc: dscho...@yahoo.com Sent: Thursday, December 20, 2012 10:25 PM Subject: KR> aileron linkage bearing ends. elevator hinges per plans or double up on hinges what bearing end are most kr builders using on ailerons heim aurora hfe ect. are most builders using plans for elevator, rudder hinges or are they doubling up on hinges. wing question i believe wings for my project are the rf48 airfoil was considering _______________________________________ Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. To UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html
