I will take the project one. 1500 if you still have it.
Jim Ellison N816JV > Date: Sun, 28 Oct 2012 07:24:04 +0000 > From: j....@comcast.net > To: kr...@mylist.net > Subject: KR> Two KR Projects for sale priced to move quickly $3500 and $1500 > > Hello everyone. Sadly the day has come for me to move on. I will be moving > soon soon due to a new job. So, my two KR projects are for sale. > First KR: KR2 N90077 built by James Allen in WI. Was a flying airplane but > Mr. Allen would not sell the airplane with the airworthiness certificate. > Diehl wings. Originally had a type one VW engine with the Hapi aircraft > conversion. I sold that engine and installed a Type IV VW engine with dual > ignition (One mag and one electronic). AeroVee carb. Prop included but I > can't recall the specs on it and I moved this plane to the hangar about a > month ago so I can get the specs if needed. Still needs the cowling and > baffling modified a little for this engine. Retractable tricycle gear. Grand > Rapids digital engine information system. Old wide band Narco nav/com that > works, but it's wide band. So, it needs a new narrow band to operate in > controlled airspace where two-way radio communication is required. All flight > instruments are there. Needs a seat back and some other interior work. I > don't know what happened to the original seat back. Has some hangar rash on > the rudder which warrants a new rudder to be built. I paid $7500 for the > airplane originally (before installing the type IV engine and Grand Rapids > digital EIS). I still have the original bank check receipt, as well as the > bill of sale, and other paperwork. Asking $3500 or best reasonable offer . > With that said, please don't waste your time or mine if you have a low ball > offer in mind since I'm already willing to take over a 50% hit to move this > quickly. It has been sitting for a few years untouched in my garage and I > hate to be selling it but it would make me feel a little better to see > someone else appreciate this little plane and get her back in the air. This > one is already sitting on top of a trailer that is intended to go with this > plane, but doesn't have to if buyer already has one. > > Second KR: KR2 This one is a project that has never been completed. It has > been built exactly to the plans as far as I can tell. Of course, this one has > it's own set of plans, build pictures, and log. It comes with all the major > airframe parts including all the prefab "quick build" parts you can get > (listed below). I don't know what company made the prefab parts and I'm not > going to try and guess, but every one of them are never been used very nice > professionally made gel-coated pieces. Below is a listing of completed and > yet-to-complete parts > Completed/installed parts: Diehl wings painted white with fuel tanks, turtle > deck, Diehl main landing gear mounted, nose gear, real nice Cleveland wheels > and Matco toe brakes installed, stainless firewall with fiberfrax insulation, > empennage (elevator and rudder). Rudder needs repair from hangar rash. > Aileron and elevator controls and rudder pedals, engine mount. > included parts that are not fitted or finished as appropriate: quick build > fuel tank, prefab forward deck, prefab engine cowling, wheel pants, canopy > (windshield is fitted to frame structurally, but not finished), Hapi > accessory case. Exhaust for a type one VW engine, alternator(stator), > magneto, prop adaptor, Ellison throttle body injector carb. > I intended to convert this plane into a taildragger by remounting the gear > legs onto the front side of the spar to eliminate the "training" wheel, but > never did. The underside has been primed with a white epoxy primer. I'm sure > there are a lot more parts I'm forgetting but these are all the major ones. I > am asking $1500 for this one. I have more than twice that in this project and > I'm willing to let it go for that to move it fast also. Not really wanting to > negotiate this one too much. > > On either of these I have some pictures already in the computer and I'm > willing to take pictures of anything I don't already have a picture of and > email them upon request. My time is very scarce, especially at the moment. > So, I'm politely requesting serious inquiries only. If interested please > email me at j....@comcast.net. This is the best way to get in touch with me > since I can't answer the phone when I'm on the floor at work, but I will get > a push notification right away letting me know I received an email. > > Sincerely, > > Jeff Provenzano > Gadsden Alabama > _______________________________________ > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > To UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html