How would one make a wing walk area anyway? I have to rework some of the glass on mine and the wife doesn't think much of the "leg over the side" method so I think I want to do the same. Is there a write up on this somewhere in one of the newsletters or something? I've been perusing the builders site looking at examples. I just want to strengthen the area between the spars on the stub wings enough to support an average adult human. But yet I don't want to add to much weight. If I just put extra ribs outboard of the one next to the fuselage, would I use the same material as the inner and outers used in the stubs? How far apart would be sufficient? Would that be all that is necessary or would you need cross "stringer" on the top to form a grid type structure?
Phill Hill Collinsville, IL On , Phillip Matheson <phillipmathe...@bigpond.com> wrote: > Anyone have a printable template for wing-walk ribs? > --------------------------------- > I must be missing something? > If you are building a KR you would have the drawings of the inner wind > section, Why can't you use those? > Phil > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > To UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html > _______________________________________ > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > To UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html
