Any filler compound is going to add alot of weight, given what you describe...
Re-skin it... On 2/13/2012 7:37 AM, robert gill wrote: > Robert GillHi, I have a question about the best way to surface and level the > ply fuse skins aft of the cockpit area without adding to much weight, the > skins have bowed inward up to 3/8" in some ares particularly just under the > top stringer, should I glass the skin first with deck cloth then use foam to > build the areas out then lay another layer of deck cloth over the areas that > have been leveled out, or put the foam straight on the ply skin then glass > over that, or glass the ply skin as before and just keep filling with micro > until the surfaces are flat and smooth ( how thick can you go with micro? ), > or does any one else have a better idea. > > _______________________________________ > Search the KRnet Archives at http://mylist.net/private/krnet/ > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html
