I sent a second post but it did not go through. About half of my posts never show up. Anyway, after I questioned in the first post, I seen the second photo which clearly shows the clearance.. My ignorance for not being through and looking at all the photos. Very nice work.
Mark Jones (N886MJ) Stevens Point, WI E-mail: flyk...@charter.net Web: www.flykr2s.com ----- Original Message ----- From: "Dan Heath" <da...@windstream.net> To: "'KRnet'" <kr...@mylist.net> Sent: Monday, January 02, 2012 9:19 AM Subject: RE: KR> Wheels And Brakes Yes, thanks for checking. There is about 1/16" all the way around. I have the cutouts for the back side of the prop, but don't see any urgency in installing them. See N64KR at http://KRBuilder.org - Then click on the pics See you at the 2012 - KR Gathering in Mt. Vernon, Il - MVN - 40th Anniversary There is a time for building and it is over. Daniel R. Heath - Lexington, SC -----Original Message----- From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net] On Behalf Of Mark Jones Sent: Monday, January 02, 2012 9:50 AM To: KRnet Subject: Re: KR> Wheels And Brakes Dan, Very nice looking pants. I was also looking at your spinner and noticed how nice that looks too. However, it is hard to see any clearance between the prop and the spinner on the cutout on the face of the prop. Is there a clearance there? If not, the spinner will cut into the prop. Just thought I would check. ----- Original Message ----- From: "Dan Heath" <da...@windstream.net> To: "'KRnet'" <kr...@mylist.net> Sent: Monday, January 02, 2012 6:07 AM Subject: KR> Wheels And Brakes Mark Jones (N886MJ) Stevens Point, WI E-mail: flyk...@charter.net Web: www.flykr2s.com _______________________________________ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html _______________________________________ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html
