I might be able to help you. I am a mechanical/aerospace/electronics engineer/A&P/radome repairman/motorcycle-auto-aircraft enthusiast/designer/manufacturer/jack-of-all-trades.LOL Also design/build/sell motorcycle accessories at www.the-biker-toy-store.com. Work has been almost non-existent for a few years and I am looking for any opportunities to work. I could provide the rings you need in AL or ABS or molded plastic. If you are interested contact me at j.cradd...@sbcglobal.net if you prefer. I do not want to turn this site into a commercial for me. Circumstances force me to give up building a KR. Thanks Johnny
--- On Thu, 1/20/11, Dave Dunwoodie <ddunw...@fnwusers.com> wrote: From: Dave Dunwoodie <ddunw...@fnwusers.com> Subject: KR> Trim Rings To: kr...@mylist.net List-Post: krnet@list.krnet.org Date: Thursday, January 20, 2011, 5:38 PM When all you get are blank stares when you ask about a bolt, you go to the KR list, and here I am!!! I built a new panel for my KR2 using aluminum, covered by carbon fiber for the face. It is VERY pretty, however because the CF is on top of the instruments, one can see the rough edges of the holes cut into the CF. I have been searching for months to find a company (or someone) that can cut some simple trim rings out of plastic, aluminum, etc. I'm coming up dry. In a nutshell, the rings would be 2.25 or 3.125 ID, and about 1/8" wide, and maybe a max. of 1/16" thick. Just precision cut rings out of some cheap, black plastic would be excellent! Someone, somewhere knows of someone, somewhere, that can make nice cuts in plastic that will give the panel the final touches. Just simple rings that can be glued to the CF and cover the rough edges in it is all that I'm trying to do. Can anybody help me? Thanks! Also, if anybody needs to see the pictures of where we are right now, please advise and I'll send them to you. Dave N1199P _______________________________________ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html
