Willie, If you ordered a motor from Len you should get a CD with it. On the CD is the manual for the motor and installation instructions. Amongst the information is the dimensions for the part of the mount that mates with the motor. Once you have those it should be a simple matter of calculating how long the mount should be, make up a dummy firewall and position the motor ahead of it at the correct distance. Make sure of the thrust line and start cutting up some 4130 tubing. If you do not have a competent welder available give me a call. I have a guy rated and approved by SAA to weld just about anything (4130, ally, inkaloy, titanium, stainless, etc) that makes up my mounts. I have the KR firewall template and acccess to a jabiru case for manufacturing the mount. Regards Dene Collett Avlec Projects cc Port Elizabeth South Africa ----- Original Message ----- From: "Willie van der Walt" <touri...@intekom.co.za> To: "KRnet" <kr...@mylist.net> Sent: Thursday, February 04, 2010 9:08 PM Subject: KR> Jabiru 3300 engine mount drawing wanted
I ordered a Jabiru 120Hp and urgently need a drawing to manufacture an engine mounting for a standard KR2. Please help. Regards Willie _______________________________________ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html
