Paul Thanks for the info. It will help me avoid interference problems. Mark Langford also had good info and earlier today Joe Horton called with some additional good ideas. Thanks all
Pete > > Hi Pete, > > Rule of thumb is never put noisy wiring (motors, transmitters, ignition) > with sensitive wiring (intercom, data, low voltage stuff etc). > > > Paul Smith > Brisbane, AUSTRALIA > pk.sm...@bigpond.net.au > http://kr2spacemodulator.blogspot.com/ > > > -----Original Message----- > > I'm presently installing wiring in the aft portion of the fuselage, > specifically the trim actuator control wiring to the Ray Allen unit in the > elevator and the com coax to the copper foil dipole that will be on the > vertical stabilizer. > My question is can I run them together in the same mounting clamps without > having an RF interference issue do to close proximity or should they be > separated? > > > > _______________________________________ > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html _________________________________________________________________ Your E-mail and More On-the-Go. Get Windows Live Hotmail Free. http://clk.atdmt.com/GBL/go/196390709/direct/01/
