>>Is it necessary to make it from 2 pieces of 5/8" square, glued together; or >>can I use 1 piece of >>wood 5/8" x 1 1/4", since I've got it?
>If I am reading this correct, you put the second stringer in >after putting the sides together. The lamination keeps the bend >from trying to straighten out. Sorry for the mix-up. I'm referring to the shoulder harness beef-up, not the auxiliary top longeron. The revision? in my book recommends using a 1/4" ply sheer panel for the shoulder harness attachment and to add a second 5/8" x 5/8". I had thought that this was to the lateral stringer (cross member) at the upper station "H". After reading Virgil's comment and re-reading the paragraph I see that it is supposed to be a 4" long addition to the longeron. My new question is: is this necessary, since the auxiliary longeron extends past "I" to "J"? Allen G. Wiesner KR-2SS/TD S/N 1118 65 Franklin Street Ansonia, CT 06401-1240 (203) 732-0508 flash...@usadatanet.net
