Guys, Just a couple of questions regarding the engine mount for a Corvair in a KR2S. 1. The plans in WW's book seem to be misleading. The dimensions for the motor mount bolts are not clearly explained or I read them wrong. The book says 10.125 for the fore to aft distance from center bolt hole to center. However, the center bolt hole distance on the left to right bolts is given as 10.25. But, the impression given on the plans is that the sides of the tray are 10.25, not the center of the mounting bolts. So is that correct? Is it 10.250 from center bolt to center bolt or is that the inside dimension of the tray? Take a quick look at the plans and let me know. I finished my tray today and I went 10.25 from center bolt to center bolt. I hope I don't have to make another one. 2. On Mark Langford's page of engine mounts it refers to the distance from the bottom of the firewall to the bottom of the aluminum block? Is that correct? What is the distance from the bottom of the firewall to the bottom of the tray? Is it different for everybody? I will use Mark's distance from the firewall but I just want to be sure of the vertical placement. Any advice would be appreciated. I made a second firewall just to mount this tray to during construction so I have one exactly per the plans.
That's it for now. Plugging away. But everything I do seems to take forever. Thanks for listening. Ray New Orleans ____________________________________________________________________________________ Do you Yahoo!? Everyone is raving about the all-new Yahoo! Mail beta. http://new.mail.yahoo.com
