What use were they sold for, exactly? (what application)
Serge
"Wood, Sidney M (Titan) @ TITAN" <sidney.wood
Envoyé par : krnet-boun...@mylist.net
22/08/2006 22:39
Veuillez répondre à KRnet
Remis le : 22/08/2006 22:39
Pour : <kr...@mylist.net>
cc : (ccc : Serge VIDAL/DNSA/SAGEM)
Objet : KR> Flaps
My KR-2 has 6061 aluminum flanges for the flap bellcranks. I found them
in the local True Value Hardware store.
I drilled a 3/16-inch hole through the flange and ¾-inch aluminum tube to
bolt them in place.
Sid Wood
KR-2 N6242
Mechanicsville, MD, USA
That is pretty much what I have in mind, except I would like to find (or
make) an aluminum flange to replace the clamp collars, then glue AND rivet
that flange to both the torque tube and the bellcranks. The tube stops
could be made the same way.
Serge Vidal
KR2 "Kilimanjaro Cloud"
Paris, France
_______________________________________
Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp
to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net
please see other KRnet info at http://www.krnet.org/info.html
" Ce courriel et les documents qui y sont attachés peuvent contenir des
informations confidentielles. Si vous n'êtes pas le destinataire escompté,
merci d'en informer l'expéditeur immédiatement et de détruire ce courriel
ainsi que tous les documents attachés de votre système informatique. Toute
divulgation, distribution ou copie du présent courriel et des documents
attachés sans autorisation préalable de son émetteur est interdite."
" This e-mail and any attached documents may contain confidential or
proprietary information. If you are not the intended recipient, please advise
the sender immediately and delete this e-mail and all attached documents from
your computer system. Any unauthorised disclosure, distribution or copying
hereof is prohibited."
