I used Gorilla glue on my Acro Sport II a few years ago and swear by it. On wood to wood or wood to foam you can't an easier and better joint. No mixing, uses moisture from the wood (may need to be wetted) to set up and is as strong a joint as any epoxy that I've tested. Any glue joint that's stronger than the material being bonded is a good joint and with Gorilla glue you have the added bonus of some gap filling ability. Plus it's fuel proof when dry.
What more to want to know about it? Fred Johnson Product Manager T.E. West, LLC. -----Original Message----- From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net] On Behalf Of Scott William Sent: Tuesday, August 22, 2006 11:38 AM To: KRnet Subject: KR> Gorilla Glue (urethane glue) I searched the archives and found some discussions about using this on foam to wood mating. I also saw that some guys were going to try it on wood to wood mating. I couldn't find any reported results of this. Anybody use this type of expanding glue on wood construction? I am considering it on some wingtip bows. The bows are made by laminating 6 pieces of 1/8" x 3/4" cap strip to form 3/4" thick bow with a 21" radius, for 180deg (half circle). My concern is that if I use T-88, the clamping pressure from making the radius in the jig will force all the glue out and starve the joint, making T-88 not reusable. Any suggestions>? Scott __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com _______________________________________ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html
