Mike: There is not mutch I can do there but the SS bolts should solve the corrosion issue og the bolts. I know they may be a little softer but I feltthey would probably be OK. anyway.
Don ------------------------------------------------------------------------ M & C wrote: > I agree, something would have to be done to protect the surface of the bolt > grip. BTW what is being done to the holes in waf to protect them after > reeming them to fit the bolts? > Mike Turner > Jackson MO > ----- Original Message ----- > From: "VIRGIL N SALISBURY" <virg...@juno.com> > To: <kr...@mylist.net> > Sent: Friday, May 05, 2006 7:22 PM > Subject: Re: KR> Reamers > > > They will not be corrosion resistant any more, Virg > > > > On Fri, 5 May 2006 18:01:58 -0500 "M & C" <aviato...@charter.net> writes: > >> Why brother trying to reem holes that are hard to get to? If the > >> bolts are a > >> close fit just take the embry cloth to the bolts and reduce bolt > >> diameters > >> slightly. I would not think this would reduce the bolt strength > >> enough to > >> amount to anything. Stick the bolts in a drill press Just at the > >> grip/thread > >> point and let it spin while holding a strip of embry cloth thus > >> reducing all > >> sides of the bolts in an even pattern. > >> Mike Turner > >> Jackson Mo > >> ----- Original Message ----- > >> From: "D F Lively" <riksh...@interl.net> > >> To: "KRNET" <kr...@mylist.net> > >> Sent: Friday, May 05, 2006 5:09 PM > >> Subject: Re: KR> Reamers > >> > >> > > > ------------------------------------------------------------------------ > >> > > >> > bo...@hatconversions.com wrote: > >> > > >> >> Don, Use an adjustable hand reamer. It's lots quicker, and your > >> holes > >> >> will > >> >> stay round.........Bobby > >> >> > >> >> > Virgil: > >> >> > > >> >> > I am back to the Dowel & Emory paper sice the WAF's are > >> already > >> >> insyalled > >> >> > on > >> >> > the closed up wing I can not even use a hand drill let alone a > >> drill > >> >> press > >> >> > so > >> >> > this will take a while. I already had the wings on with > >> > >> >> > >> >> > > >> >> > VIRGIL N SALISBURY wrote: > >> >> > > >> >> >> Drill the bolt holes undersized then ream. You do one > >> at a > >> >> time, > >> >> >> KEEP > >> >> >> the reamer square to the work. Put it in the drill press and > >> hand > >> >> turn. > >> >> >> Lubricate > >> >> >> well, Virg > >> >> >> > >> >> >> On Fri, 5 May 2006 23:00:49 +1000 "Chris Johnston" > >> >> >> <chr...@ozdocs.net.au> > >> >> >> writes: > >> >> >> > I am on the scrounge for parts, I need some > > >> >> >> > Search the KRnet Archives at > >> >> >> > http://www.maddyhome.com/krsrch/index.jsp > >> >> >> > to UNsubscribe from KRnet, send a message to > >> >> krnet-le...@mylist.net > >> > > _______________________________________ > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html
