I agree, something would have to be done to protect the surface of the bolt grip. BTW what is being done to the holes in waf to protect them after reeming them to fit the bolts? Mike Turner Jackson MO ----- Original Message ----- From: "VIRGIL N SALISBURY" <virg...@juno.com> To: <kr...@mylist.net> Sent: Friday, May 05, 2006 7:22 PM Subject: Re: KR> Reamers
> They will not be corrosion resistant any more, Virg > > On Fri, 5 May 2006 18:01:58 -0500 "M & C" <aviato...@charter.net> writes: >> Why brother trying to reem holes that are hard to get to? If the >> bolts are a >> close fit just take the embry cloth to the bolts and reduce bolt >> diameters >> slightly. I would not think this would reduce the bolt strength >> enough to >> amount to anything. Stick the bolts in a drill press Just at the >> grip/thread >> point and let it spin while holding a strip of embry cloth thus >> reducing all >> sides of the bolts in an even pattern. >> Mike Turner >> Jackson Mo >> ----- Original Message ----- >> From: "D F Lively" <riksh...@interl.net> >> To: "KRNET" <kr...@mylist.net> >> Sent: Friday, May 05, 2006 5:09 PM >> Subject: Re: KR> Reamers >> >> > ------------------------------------------------------------------------ >> > >> > bo...@hatconversions.com wrote: >> > >> >> Don, Use an adjustable hand reamer. It's lots quicker, and your >> holes >> >> will >> >> stay round.........Bobby >> >> >> >> > Virgil: >> >> > >> >> > I am back to the Dowel & Emory paper sice the WAF's are >> already >> >> insyalled >> >> > on >> >> > the closed up wing I can not even use a hand drill let alone a >> drill >> >> press >> >> > so >> >> > this will take a while. I already had the wings on with >> >> >> >> >> > >> >> > VIRGIL N SALISBURY wrote: >> >> > >> >> >> Drill the bolt holes undersized then ream. You do one >> at a >> >> time, >> >> >> KEEP >> >> >> the reamer square to the work. Put it in the drill press and >> hand >> >> turn. >> >> >> Lubricate >> >> >> well, Virg >> >> >> >> >> >> On Fri, 5 May 2006 23:00:49 +1000 "Chris Johnston" >> >> >> <chr...@ozdocs.net.au> >> >> >> writes: >> >> >> > I am on the scrounge for parts, I need some >> >> >> > Search the KRnet Archives at >> >> >> > http://www.maddyhome.com/krsrch/index.jsp >> >> >> > to UNsubscribe from KRnet, send a message to >> >> krnet-le...@mylist.net >>
