REF. Dwg. #s 58, 59, 60, 61, 62 & 63 KR Netters:
I am ordering parts for these and really all the plans give really is pictoral evidence of wha is req'd. Whad I see is sherical rod ends attached with AN3 bolts to the bell crank with 1/4-20 female thrds for a rod connection. Then I see a 1/4-20 thrd end with a lock nut on one end & a male nonthreaded end that is inserted in the end of a tube with no indication as to how it is secured to the tube of unknown diameter, ID & OD, and material specification. I would like to know what all the pieces are!--- Nuts, Bolts, Washers, Grip of bolts Rod ends etc to compare with my list before I order. Ref Dwg. #78: The same holds true here for aileron end rod parts: The dwg shows a sperical bearing rod end attached it appears with an AN3 bolt of unspecified length and grip thru (3) washers, the bearing & controll horn. A guess is that the rod end is 1/4-20 with a lock nut on the end of a thrd'd rod. The other end, however, from bell crank end drawing show clearly a tube. What kind of tyransition happens between the rod & the tube between the rod and the tube. I can see how the tube construction at the bell crank end is a stronger construction and could make the change either way but I need to order the parts. I would appreciate a good description of parts here as well. Tanks Donald F. Lively Burlington IA 52601 riksh...@interl.net
